Please note the
following when selecting the part numbers for your radio
• The
SignaLink USB is always
supplied with one radio cable. The SignaLink USB part number (SLUSBxxx)
determines which radio cable is
included. For example, SignaLink USB p/n “SLUSB6PM” includes
radio cable p/n “SLCAB6PM”. If you have multiple radios and need
more than one radio cable, then extra radio cables can
be purchased using the
part numbers shown under the “Radio Cable Only” column.
• Some
radios have multiple options for connecting the SignaLink USB. Rear
panel connections are generally preferred over the Mic jack and will
be listed first when
available.
• If
the SignaLink USB or Radio Cable part
number is noted as
“DATA“, “ACCY”, “ACC”, “REAR” (etc.), then the part number
is for the radio's rear
panel connection. If the
part number is not marked
this way then it
is for the radio's Mic
jack.
• Our
optional Plug & Play Jumper Modules provide the easiest installation
possible and are highly recommended for configuring your SignaLink.
Jumper modules are available for most configurations and are shown
under the “Jumper Module” column.
If a jumper module is
not listed then you will need to configure the SignaLink
using the supplied jumper
wires.
• Be
sure to read any notes shown for your radio as these details are
important radio requirements or restrictions.
|
